HVAC & Mechanical · Cook County, Illinois
HVAC & Mechanical inspection readiness
for Cook County.
Send us photos of your hvac & mechanical work and your tracking list. Get a written findings report within 24 hours* — before your inspector does.
Ductwork, equipment, refrigerant lines, condensate, ventilation, and IMC compliance.
Your first report is free · Limited spots each week
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report checks your hvac & mechanical work in Cook County, Illinois against the codes and specs that apply. Send photos of ductwork, equipment, refrigerant lines, condensate, ventilation, and imc compliance and your tracking list — get a written findings report within 24 hours* scoring every item. Free — limited spots each week — nothing new found, no charge.
Trusted by teams at
Common questions
What teams ask about hvac & mechanical inspections in Cook County
These are the questions field teams ask before an inspection. Our report answers all of them for your specific job.
HVAC inspection preparation in Cook County?
mechanical inspection checklist in Cook County?
what do HVAC inspectors look for in Cook County?
ductwork inspection prep in Cook County?
refrigerant line inspection requirements in Cook County?
Three steps. Five minutes.
Submit your hvac & mechanical job, and our patent-pending AI reviews every photo against the standards that apply in Cook County.
Tell us about your hvac & mechanical job.
Project name, address in Cook County, and scope. We look up the applicable standards automatically.
Send photos of your hvac & mechanical work.
Upload directly, share a Drive/Dropbox link, or email them. Your existing tracking sets the bar.
AI reviews every photo.
Cross-references against codes, specs, and your tracking — flagging hvac & mechanical deviations your list missed.
Get your report within 24 hours*.
Each finding includes the photo, location, and reference. Sorted by severity.
HVAC & Mechanical findings we help catch in Cook County.
Examples based on past reports — each includes the photo, location, and the reference checked against.
Overhead sanitary sewer line in basement runs without required cleanout access fitting within 5 feet of the building drain connection
Basement wall steel reinforcement visible at window buck shows horizontal rebar spacing at 24 inches instead of required 16 inches on center
Subpanel in detached garage fed with 3-wire feeder instead of required 4-wire with separate neutral and ground conductors
Furnace flue pipe single-wall connector passes within 4 inches of combustible framing, below required 6-inch minimum clearance
Egress window in finished basement bedroom measures 4.8 square feet net clear opening instead of required 5.7 square feet minimum
Dryer exhaust duct exceeds 25-foot equivalent length with no booster fan, creating lint accumulation and fire ignition risk
Send us one hvac & mechanical job. Get a full findings report. No cost, no commitment.
Every report is reviewed by a QA professional before delivery. That means we can only take a limited number each week.
GET YOUR FREE HVAC & MECHANICAL REPORTLimited spots each week.
Every report is reviewed by a QA professional before delivery. Submissions are reviewed in order received.