Electrical · Cook County, Illinois
Electrical inspection readiness
for Cook County.
Send us photos of your electrical work and your tracking list. Get a written findings report within 24 hours* — before your inspector does.
Panels, wiring, conduit, grounding, AFCI/GFCI, service equipment, and NEC compliance.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report checks your electrical work in Cook County, Illinois against the codes and specs that apply. Send photos of panels, wiring, conduit, grounding, afci/gfci, service equipment, and nec compliance and your tracking list — get a written findings report within 24 hours* scoring every item. $250, one time — nothing new found, no charge.
Trusted by teams at
Common questions
What teams ask about electrical inspections in Cook County
These are the questions field teams ask before an inspection. Our report answers all of them for your specific job.
how do I prepare for an electrical inspection in Cook County?
electrical inspection checklist in Cook County?
what do electrical inspectors look for in Cook County?
pre-inspection review electrical in Cook County?
electrical rough-in inspection prep in Cook County?
Three steps. Five minutes.
Submit your electrical job, and our patent-pending AI reviews every photo against the standards that apply in Cook County.
Tell us about your electrical job.
Project name, address in Cook County, and scope. We look up the applicable standards automatically.
Send photos of your electrical work.
Upload directly, share a Drive/Dropbox link, or email them. Your existing tracking sets the bar.
AI reviews every photo.
Cross-references against codes, specs, and your tracking — flagging electrical deviations your list missed.
Get your report within 24 hours*.
Each finding includes the photo, location, and reference. Sorted by severity.
Electrical findings we help catch in Cook County.
Examples based on past reports — each includes the photo, location, and the reference checked against.
Overhead sanitary sewer line in basement runs without required cleanout access fitting within 5 feet of the building drain connection
Basement wall steel reinforcement visible at window buck shows horizontal rebar spacing at 24 inches instead of required 16 inches on center
Subpanel in detached garage fed with 3-wire feeder instead of required 4-wire with separate neutral and ground conductors
Egress window in finished basement bedroom measures 4.8 square feet net clear opening instead of required 5.7 square feet minimum
Dryer exhaust duct exceeds 25-foot equivalent length with no booster fan, creating lint accumulation and fire ignition risk
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET YOUR ELECTRICAL REPORTLimited spots each week.
Every report is reviewed by a QA professional before delivery. Submissions are reviewed in order received.