Marietta, Georgia
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Marietta.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Marietta's growth in Cobb County, driven partly by Dobbins Air Reserve Base and Lockheed Martin operations, produces steady residential and commercial construction under Georgia building codes. Code Buddy's Inspection Readiness Report for Marietta costs $250 one-time and delivers written findings within 24 hours. Upload your photos and tracking list to identify problems before the Marietta Building Department inspector arrives.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Marietta, GA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Marietta, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Truss bracing missing permanent lateral restraint at bearing points in new Cobb County subdivision home
Service panel bonding jumper not installed on meter-main combo unit at suburban Marietta townhome
Duct leakage exceeds Georgia energy code maximum in spray-foamed attic of production-built home
Tankless water heater vent termination too close to operable window on side yard setback wall
Thermal bypass at tub-shower platform allowing unconditioned air from crawl space into wall cavity
Garage fire separation drywall not extending to underside of roof sheathing above dropped ceiling
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What does the Marietta Inspection Readiness Report include?
The report reviews every item on your tracking list against Marietta Building Department requirements and Georgia state codes. Each finding includes the code section, severity level, and a recommended correction to address before your scheduled inspection.
How does Cobb County suburban growth affect Marietta inspections?
Marietta's production-home building pace means inspectors see repeated issues with duct leakage, truss bracing, and energy code compliance. The report flags these high-frequency failures specific to the subdivision construction common throughout Cobb County.
Can the report help with commercial projects near Dobbins ARB?
Yes. Commercial and light industrial work near Dobbins Air Reserve Base and the Lockheed Martin campus follows the same Marietta Building Department process. The report covers commercial occupancy types including warehouse, office, and mixed-use projects.
How much does the report cost and when do I get it?
The report costs $250 flat and is delivered within 24 hours after you upload your photos and tracking list. No additional charges apply regardless of how many trades or inspection items are included in your submission.
Does the report address Georgia energy code items Marietta inspectors check?
Yes. Marietta inspectors enforce Georgia's energy code on duct leakage testing, insulation R-values, air sealing, and window U-factors. The report reviews your photos for visible energy code violations that commonly cause failed inspections in new construction.